Form 130 Decking Clip and Stainless Steel Screw
Made from HDPE plastic, our hidden fixing clips are used to attach our Form 130 boards to each joist below (max. 400mm centres). This fixing system, which is included in our BRANZ Appraisal, is installed by sliding the clip into the groove on the size of the board and screwing it into the joist below with the screw provided.
The torx head, blackened screw is 316 Stainless steel and has been designed to be easily unscrewed from between the boards without causing damage. Use of your drill on low torque and leaving screws loose until the next board is in position is recommended.
Sold in boxes of 200. Available on order with your Biform Composite Deck and as an extra from our online shop.
We have decking clips and screws available for fixing to either timber subframe or aluminium subframe.
Torx Composite Screw
Our 60mm Torx head composite screw is made from 316 stainless steel. Designed to surface fix without leaving a mushrooming effect. When used with Biform composite decking or composite screening, pre-drill for the best results.
Used for fixing Forest Board, screening battens and perimeter boards, facing boards and breakerboards on Form 130 & 140. Suitable for fixing to timber subframe.
Available in 3 colours: Silver, Black and Vintage.
Sold in bags of 50. Available on order with your composite deck and as an extra from our online shop.
Stop Clip and Stainless Steel Screw
Stop clips are an important part of our design system to stop or reduce the thermal movement of the deck boards.
Use ONE per board ONLY in the following situations:
-For lengths over 3500mm
-On either side of a butt-join
-Adjacent to angle cuts
-On short boards with no picture frame, e.g., walkways
For more information, see installation instructions here.
Sold in packs of 10. Available on order with your deck and as an extra from our online shop.
We have stop clips and screws available for fixing to either timber subframe or aluminium subframe.
TUSK Tungsten Carbide Blade
When cutting our decking, we recommend Tusk Tungsten Carbide Blades.
Available in:
12-inch (305mm) Tungsten Carbide Sawblade 80T
10-inch (254mm) Tungsten Carbide Sawblade 80T
Sold individually. Available on order with your deck and as an extra from our online shop
Stack N Pack Joist Mounts & Packers
A stackable joist mount, specifically designed to support joists and provide drainage over waterproof membranes and concrete substrates. Achieve your desired height using stacked joist mounts and our 3mm packers. Or use Joist mounts one high and rip your joists to suit the fall
Joist mounts are sold in boxes of 24.
Joist Mount Packers are sold in packs of 12.
Available on order with your deck and as an extra from our online shop
Deck Cleaner
To keep your deck looking like new we recommend a minimum annual scrub down with Biform Deck Cleaner, or every six months in areas where trees overhang or debris gathers. For more information, see our Care & Maintenance Guide here.
2kg container – covers 70m2
Available on order with your deck and as an extra from our online shop
